<< LOCK-N-STITCH® Products << Right Angle Tooling for Close Quarter
Right Angle Tools
With all the new capability at your fingertips for repairing cracks, the crucial question has changed from “How am I going to repair this?” to one simple query: “Is there enough space for my hands and the tools?” Most of you have discovered that your repair limitations are now coming from physical and environmental considerations rather than technical capability.
We’re introducing a line of close quarters right angle tooling you may find very useful when working in tight spots. The new RA line will help you access cracks in hard-to-reach areas such as cylinder bores and other places where standard drills and taps are too long.
The RA1310AH drill and RA2A2551 driver are for high production. The RA0080 drill adapter and the RA5009 air ratchet are less expensive tools for those who only want to make a few repairs.
Close quarter right angle drill
RA1310AH
|
Uses 1/4-28 threaded drill bits
(for drill bits, see below)
2800 RPM, 0.22 HP
2-1/4" minimum space required |
Back to top
Close quarter right angle threaded drill adapter
RA0080 |
2-1/2 minimum space |
Change any drill into a right angle drill
Use with drills up to 2500 RPM
Uses 1/4-28 threaded drill bits
(for drill bits, see below)
2-1/2" minimum space required |
Back to top
Close quarter right angle driver
RA2A2551
|
Uses 1/4" Hex male tooling
400 RPM maximum speed
Easy access reversing button
360 degree rotatable head |
Can be used for power tapping, spotfacing, countersinking, and pin installation. 2-5/8" minimum space required
Back to top
Close quarter 1/4" drive air ratchet
RA5009
|
RPM 200 maximum speed
6.6 inches in length
1/4" square drive
Maximun torque 20 ft. lbs.
3-1/2" minimum space required |
Use for tapping & pin installation (not for drilling, spotfacing or countersinking)
Back to top
It’s not a crack free world.....
You can always depend on LOCK-N-STITCH® …………… . |