<< LOCK-N-STITCH® Products << Right Angle Tooling for Close Quarter
Quarter Close - Drill Bits, Taps, Countersinks, Spotfacers and Adaptors
1/4-28 Treaded Drill Bits
RA0010
RA0015
RA0020
RA0025
RA0030
RA0035
RA0040
RA0045
|
1.250" oal - wire29 drill bit for L4 & C1 pins
2.125" oal - wire29 drill bit for L4 & C1 pins
1.250" oal - wire 7 drill bit for L6 & C2F pins
2.125" oal - wire 7 drill bit for L6 & C2F pins
1.250" oal - Letterl drill bit for L8 pins
2.125" oal - Letterl drill bit for L8 pins
1.250" oal - Letter O drill bit for C3 pins
2.125" oal - Letter O drill bit for C3 pins |
Back to top
Taps for Close Quarters
RA0101
RA0103
RA0105
|
square shank - starting
square shank - bottoming
square shank - piloted
|
L4 Tough duty taps 1-1/16" oal
RA0107
RA0109
RA0111
|
square shank - starting
square shank - bottoming square shank - piloted |
L6 Tough duty taps 1-1/4" oal
RA0113
RA0115
RA0117
|
hex shank - starting
hex shank - bottoming
hex shank - piloted |
L8 taps 1-1/16" oal
RA0119 RA0121
|
square shank - finishingsquare shank - bottoming |
C2F taps 1-1/16" oal
RA0123 RA0125
|
square shnk - finishingsquare shnk - bottoming |
C2F taps 1-5/8" oal
RA0127 RA0129
|
square shnk - finishingsquare shnk - bottoming |
C3 taps 1-5/8" oal
RA0131 RA0133
RA0135
|
hex shank - roughing
hex shank - finishing
hex shank - bottoming |
C3 taps 2-1/4" oal
RA0137 RA0139
RA0141
|
hex shank - roughing
hex shank - finishing
hex shank - bottoming |
Back to top
Countesinks for Close Quarters (1.250" oal)
RA0143
RA0145
RA0147
|
L4 countersink square shank Use with RA0070
L6 countersink hex shank use with RA0075
L8 countersink hex shank use with RA0075 & RA2A2551
|
Back to top
Spotfacers for Close Quarters (1.250" oal)
RA0149
RA0151 |
C1 spotfacer square shank use with RA0070
C2F spotfacer hex shank use with RA0075 & RA2A2551 |
Spotfacers for Close Quarters (1.500" oal)
RA0153 |
C3 spotfacer hex shank use with RA0075 & RA2A2551 |
Back to top
Close quarters 1/4-28 threaded drive adapters
RA0070
RA0075
|
Square adapter - for use with the square shank L4 countersinks & C1 spotfacers
For use with hex shank L6/8 countersinks & C2F/C3 spotfacers |
Back to top
It’s not a crack free world.....
You can always depend on LOCK-N-STITCH® …………… . |