<< LOCK-N-STITCH® Products << Repair Kits
Locks Kit
L10 Lock Kit
Locks: 10 each of L10 bottom locks and L10 surface locks
Drill bits: 3 each of 1/16" drill bits and 1/8" drill bits
Jig set: 1 set of drill jigs with two sets of locating pins
Drill stop: 1 each of a drill stop for 1/16" drill bits
1 each of a drill stop for 1/8" drill bits
Other: 30ml of tapping fluid to lubricate while drilling (L750)
20ml of lubricating heat-conductive sealant/retainer (LHC623)
L15/5 Lock Kit
Locks: 10 each of L15/5 locks
Drill bits: 3 each of wire 15 drill bits
Jig set: 1 set of drill jigs with two sets of locating pins
Drill stop: 1 each of a drill stop for wire 15 drill bits
Other: 30ml of tapping fluid to lubricate while drilling (L750)
20ml of lubricating heat-conductive sealant/retainer (LHC623)
L15 Lock Kit
Locks: 10 each of L15 bottom locks and L15 surface locks
Drill bits: 3 each of 3/32" drill bits and 3/16" drill bits
Jig set: 1 set of drill jigs with two sets of locating pins
Drill stop: 1 each of a drill stop for 3/32" drill bits
1 each of a drill stop for 3/16" drill bits
Other: 30ml of tapping fluid to lubricate while drilling (L750)
20ml of lubricating heat-conductive sealant/retainer (LHC623)
L20 Lock Kit
Locks: 10 each of L20B locks and 5 each of L20S locks
Drill bits: 3 each of 1/8" drill bits and 1/4" drill bits
Jig set: 1 set of drill jigs with two sets of locating pins
Drill stop: 1 each of a drill stop for 1/8" drill bits
1 each of a drill stop for 1/4" drill bits
Other: 4 ounces of tapping fluid to lubricate while drilling (L750)
60ml of lubricating heat-conductive sealant/retainer (LHC623)
L30 Lock Kit
Locks: 10 each of L30B locks and 5 each of L30S locks
Drill bits: 3 each of 3/16" drill bits and 3/8" drill bits
Jig set: 1 set of drill jigs with two sets of locating pins
Drill stop: 1 each of a drill stop for 3/16" drill bits
1 each of a drill stop for 3/8" drill bits
Other: 1 each of a pilot bushing and a bushing puller
4 ounces of tapping fluid to lubricate while drilling (L750)
60ml of lubricating heat-conductive sealant/retainer (LHC623)
L40 Lock Kit
Locks: 10 each of L40B locks and 5 each of L40S locks
Drill bits : 3 each of 1/4" drill bits and 1/2" drill bits
Jig set: 1 set of drill jigs with two sets of locating pins
Drill stop: 1 each of a drill stop for 1/4" drill bits
1 each of a drill stop for 1/2" drill bits
Other: 1 each of a pilot bushing and a bushing puller
4 ounces of tapping fluid to lubricate while drilling (L750)
60ml of lubricating heat-conductive sealant/retainer (LHC623)
L50 Lock Kit
Locks: 10 each of L50B locks and 5 each of L50S locks
Drill bits: 3 each of 3/16" drill bits, 3/8" drill bits and 3/4" drill bits
Jig set: 1 set of drill jigs with two sets of locating pins
Drill stop: 1 each of a drill stop for 3/16" drill bits
1 each of a drill stop for 3/8" drill bits
1 each of a drill stop for 3/4" drill bits
Other: 1 each of a pilot bushing and a bushing puller
4 ounces of tapping fluid to lubricate while drilling (L750)
60ml of lubricating heat-conductive sealant/retainer (LHC623)
L60 Lock Kit
Locks: 10 each of L60B locks and 5 each of L60S locks
Drill bits: 3 each of 1/2" and 1" X 1/2" shank and 1-1/4" X 1/2" shank drill bits 1 each letter O drill bit
Jig set: 1 two piece set of drill jigs
1 each tie-down bolt drill jig
2 each 3/8" X 2-1/2' bolts
1 each 3/8" 16 tap
1 each dowel pin puller slide hammer
2 each 1-1/4" X 1/2" step dowels
3 each 1/2" X 3" dowel pins
Other: 4 ounces of tapping fluid to lubricate while drilling (L750)
60ml of lubricating heat-conductive sealant/retainer (LHC623))
It’s not a crack free world.....
You can always depend on LOCK-N-STITCH® …………… . |