<< LOCK-N-STITCH® Products << Repair Kits

CASTMASTER® Kit

• Combination CASTMASTER® Kit
• C1 Pin Kits
• C2F Pin Kits
• C3 Steel Pin Kits
• C4 Steel Pin Kits

Combination CASTMASTER® Kit

This large kit gives you the incredible gripping, holding, and pulling ability of
CASTMASTER®TM in three sizes. 
You'll have the potential of being able to repair almost any cracked casting
you ever encounter. The SpiralhookTM threads
of these phenomenal stitching pins draw the material tightly together and
rebuild the strength that was lost when the crack occurred.  You can restore
structural integrity to all sorts of shapes:  inside corners, outside corners,
tight radii and combustion chambers.  From thicknesses of 0.100" to 2.0",
you can stitch it with this CASTMASTER®TM kit.

If you need the power, strength, and larger size of the C4 stitching pins, which have thread lengths from 1" to 3", add a C4 kit

C1 Pin Kits

C1SK  C1 Steel Pin Kit

Pins:        50 each of:  C1A, C1B, and C1C
Taps:       2 each of C1BT, and C1FT
Drill bits:  6 each of AccusizeTM wire 29 drill bits
Other:     1 tap extractor and 1 extra set of fingers
              1 each tap adapter
              2 each of C1 spotfacer
              1 each of pin spacing drill jig
              1 each of a drill stop for wire 29 drill bits and a drill stop for C1 spotfacer
              5 each of TRIM-KUT® discs with 1 mandrel
              4 ounces of tapping fluid for cast iron, steel & alum. (L750)
              60ml of heat-conductive sealant for steel (LHC724)

C1LK Aluminum C1 Kit:   Order and you will receive the tooling above with aluminum pins and aluminum sealant instead of the steel quivalents.

C1SLK Combination C1 Steel & Aluminum Kit:  Order and you will receive C1 pin kit with both steel and aluminum.

C2F Pin Kits

C2FSK  C2F Steel Pin Kit

Pins:       50 each of:  C2FA, C2FB, C2FC, C2FD, and C2FE
Taps:      2 each of C2FBT, and C2FFT
Drill bits: 6 each of AccusizeTM wire 7 drill bits
Other:    1 tap extractor and 1 extra set of fingers
             1 each tap adapter
             2 each of C2F spotfacer
             1 each of pin spacing drill jig
             1 each of a drill stop for wire 7 drill bits and a drill stop for C2F spotfacer
             5 each of TRIM-KUT® discs with 1 mandrel
             4 ounces of tapping fluid for cast iron, steel & alum. (L750)
             60ml of heat-conductive sealant for steel (LHC724)

C2FLK Aluminum C2F Kit:   Order and you will receive the tooling above with aluminum pins and aluminum sealant instead of the steel equivalents.

C2FSLK Combination C2F Steel & Aluminum Kit:  Order and you will receive  C2F pin kit with both steel and aluminum.

C3 Steel Pin Kits

C3K  C3 Steel Pin Kit

Pins:       50 each of:  C3A, C3B, C3C, and C3D
Taps:      1 each of C3RT, C3BT, and C3FT
Drill bits: 6 each of AccusizeTM letter O drill bits
Other:     2 each of C3 spotfacer
              1 each C3 pin spacing drill jig
              1 each larger collet for Sioux tapper for  C3 taps
              1 each of a drill stop for letter O drill bits and a drill stop for C3 spotfacer
              5 each of grinding discs with one mandrel
              4 ounces of tapping fluid for cast iron steel and aluminum (L750)
              60ml of heat-conductive sealant for steel (LHC724)

C4 Steel Pin Kits

C4K  C4 Steel Pin Kit  

Pins:        50 each of: C4A, C4B, and C4C
Taps:       1 each of C4RT, C4BT, and C4FT
Drill bits: 6 each of drill bits for the C4 pins
Other:      2 each of C4 spotfacer
                5 each of grinding discs with one mandrel
                4 ounces of tapping fluid (L750)
                60ml of heat-conductive sealant for steel
                stitching pins (LHC724)

It’s not a crack free world.....
You can always depend on LOCK-N-STITCH® …………… .