<< LOCK-N-STITCH® Products << Drill Bits

AccuSizeTM Drill Bits

AccuSizeTM drill bits prevent oversizing and egg-shaping drilled holes.  Having a good, round and accurate-sized hole is essential to making a good repair.  Standard drill bits usually drill oversized and out-of-round holes when drilled by hand.  AccusizeTM drill bits also stay sharp longer and drill cast iron faster than any other split point high speed steel drill bit.  Our AccusizeTM drill bits are patent pending.

• AccuSize Tough Duty Drill bits (wire 29) for L4 & C1 Stitching Pins
• AccuSize Tough Duty Drill bits (wire 7) for L6 & C2F Stitching Pins
• AccuSize Tough Duty Drill bits (letter L) for L8 Stitching Pins
• AccuSize Tough Duty Drill bits (letter O) for C3 Stitching Pins
• AccuSize Tough Duty Drill bits (fractional 1/2 in) for C4 Stitching Pins

AccuSize Tough Duty Drill bits (wire 29)
for L4 & C1 Stitching Pin

Back to top

AccuSize Tough Duty Drill bits (wire 7)
for L6 & C2F Stitching Pin

Back to top

AccuSize Tough Duty Drill bits (letter L)
for L8 Stitching Pin

Back to top

AccuSize Tough Duty Drill bits (letter O)
for C3 Stitching Pin

Back to top

AccuSize Tough Duty Drill bits (fractional 1/2 in)
for C4 Stitching Pin

Back to top

It’s not a crack free world.....
You can always depend on LOCK-N-STITCH® …………… .